1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc wr300 issues....

Discussion in '2 Stroke' started by 24valvecummins, Apr 21, 2015.

Page 3 of 3

  1. 24valvecummins Husqvarna
    A Class

    Husqvarna Motorcycle:
    2014 wr300
    Other Motorcycles:
    kdx200 yz250
    the packing doesn't look to bad a little wet though
    20150427_185909.jpg
    24valvecummins, Apr 27, 2015
    #41

  2. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    doesnt look terrible..are you repacking? if not you could rewrap starting at the clean end instead...
    justintendo, Apr 27, 2015
    #42

  3. 24valvecummins Husqvarna
    A Class

    Husqvarna Motorcycle:
    2014 wr300
    Other Motorcycles:
    kdx200 yz250
    I repacked it with new stuff. I also took the clutch cover off and adjusted the clutch a little bit but I doubt it will make a difference. I will test it out tommrow . Next step is the husky dealer.....
    24valvecummins, Apr 27, 2015
    #43

  4. kx3089 Husqvarna
    AA Class

    Location:
    western pa
    Husqvarna Motorcycle:
    wr250
    I bet your power valve linkage is screwed up.My 250 suddenly lost its top end after I had done some work.I had not hooked linkage up properly. Pop the cover and take a look,fire it up and see if it's working right.
    kx3089, Apr 27, 2015
    #44

  5. 24valvecummins Husqvarna
    A Class

    Husqvarna Motorcycle:
    2014 wr300
    Other Motorcycles:
    kdx200 yz250
    I'm going to check that after work. I did have the linkage off on the left side of the bike
    24valvecummins, Apr 28, 2015
    #45

  6. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    :busted:
    NCSteve, Apr 28, 2015
    #46
    24valvecummins likes this.

  7. 24valvecummins Husqvarna
    A Class

    Husqvarna Motorcycle:
    2014 wr300
    Other Motorcycles:
    kdx200 yz250
    Look what I found..
    14302496465542110453422.jpg

    Attached Files:

    24valvecummins, Apr 28, 2015
    #47
    justintendo, Eaglefreek and juicypips like this.

  8. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Clip that puppy back on, pops off again lock wire the plastic where it pinches the ball joints.
    Or order new.
    juicypips, Apr 28, 2015
    #48

  9. 24valvecummins Husqvarna
    A Class

    Husqvarna Motorcycle:
    2014 wr300
    Other Motorcycles:
    kdx200 yz250
    I put it back on.. I got 65mph out of it, like a whole new bike now. I really appreciate every ones help. You guys kick ass!
    24valvecummins, Apr 28, 2015
    #49
    Motosportz likes this.

  10. Eaglefreek Husqvarna
    Pro Class

    Location:
    Fayetteville,TN
    Husqvarna Motorcycle:
    11 WR300
    Should still go faster than 65. :)
    Eaglefreek, Apr 28, 2015
    #50
    NCSteve likes this.

  11. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    Well done! :cheers:
    NCSteve, Apr 28, 2015
    #51

  12. 24valvecummins Husqvarna
    A Class

    Husqvarna Motorcycle:
    2014 wr300
    Other Motorcycles:
    kdx200 yz250
    I'm sure if I re adjusted the power valve I could get more top end. But I do alot of single track and just wanted 50mph out of it to connect trails, so I'm more than happy with it and just want to ride lol
    24valvecummins, Apr 28, 2015
    #52
Page 3 of 3