All 2st WR300 snapped swinging arm, pics inside!

Hi, im going to bump this up as im still looking for a swing arm if anyone has one please?

Lemne contact my mate hes got a wr 250 1999 swinger kicking about.

Just got your mates email, thanks.

that brings up an interesting point, what is the interchangeability of the 2 strokes over the years

This will depend on the part.

Well i doubt it will fit but if it does then nowt lost.
I think it looks more like the 360 swinger.

Bit of a GLC reunion going on here!

what about the swingarm
seems they changed the shock a couple times did the linkage change too?

Yeah a bit but without the fowl language

I took some dimensions and were getting the other one measured to check whats what. I know the axle is smaller and the caliper may be different but he has one of those so maybe swap that too. I will let everyone know.

Not sure on the linkage issue, but use the spacers for a 2000 250/360 if you end up fitting a 2000-earlier swingarm. They fit inside the 25mm wheel bearings, but with a reducer that allows them to be used for a 20mm Axle (pre-2000 models).

Theres a few on the bay fanging from sm570 to wr 125's so if you manage to work out what bananas what...
If you be needing me to measure my swinger for you wr360 2002 may help point you in direction of replacment.

Cheers bud, 4 strokes and 125's have the chain on the wrong side, its got to be a 250+ two stroke. I think the 1999 one will fit but needs different wheel spacers and a smaller axle or the slots milled out by 5mm.

If anyone is interested I fitted the 1999 CR250 swing arm to the 2010 WR300. The only difference was the slots for the rear axle were 5mm too narrow so the options were to swap the rear axle and spaces to 20mm or mill the slots out to match the 2010 dimensions, seeing the rest of the swing arm was identical and we milled out the slots to the newer spec and jobs a goodun it bolts up perfectly. Everthing else fits, brake caliper, chain slider etc etc. Happy days.

Sweet back off the road!