• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2008 TE610 leaking fuel on ground with full tank

dannyw68

Husqvarna
C Class
Hi everyone,

I just picked up a 2008 TE610 and am loving it. The only issue I have is that when I fill up the tank and park it in my garage, it always leaks a small amount of fuel on the ground. Its a slow leak, maybe one drip every 2-3 seconds. I'm guessing the previous owner removed some of the emissions stuff, but I'm not familiar enough with the bike to know if this is the case.

Is this a common issue on these bikes? Any help you can offer would be greatly appreciated.

Thanks,
Dan
 
Do you know where is it leaking from ?
The tank itself ?
A hose that connect from the bottom of the tank to the engine or maybe the former emission junk that connect to the top of the tank ?

:excuseme:
 
There is a good chance the top left tank vent hose is not routed high enough above the tank to account for fuel exansion as it warms up on a full tank if the PO removed the original canister and check valves and rerouted hosing. Mine would gush on the ground at fill up when I first got it (used) until I realized the open hose was routed straight down to the skid plate.
 
I routed my tank vent hose straight forward, under the fork crown, then back over the handlebar clamps, then into the steerer tube. Problem solved. And NO the over splash of gas once in a while will NOT wash the grease out of the head bearings..... Good Luck....
 
Stroker Ace;110296 said:
I routed my tank vent hose straight forward, under the fork crown, then back over the handlebar clamps, then into the steerer tube. Problem solved. And NO the over splash of gas once in a while will NOT wash the grease out of the head bearings..... Good Luck....

It just runs down your fender and drips onto the hot header pipes and flashes into a fire! :busted: I have not personally heard of that happening though. Just seems like it could happen.
 
Turns out the leak was from that hose. It was routed straight down from the tank. i rerouted it and now there is no leak on the ground.

However, I did notice that when the bike is leaned on the kick stand, some small amount of fuel leaks from around the fuel cap. I opened it and the level is below the rim, yet somehow it is getting siphoned up and out of the cap? Its not much, just three or four drizzles, but really strange. Any ideas?
 
K7MDL;110302 said:
It just runs down your fender and drips onto the hot header pipes and flashes into a fire! :busted: I have not personally heard of that happening though. Just seems like it could happen.

You need a spark to ignite the fuel. I should have been blown up 30yrs. ago..... Next time you go to a shop, look and see how the new dirt bikes do it. That's where I got the idea. The idea of doing it that way gets a loop of hose quite a bit higher than the level of the fuel, you'll get a minimal amount drips with a full tank from hitting some rough stuff, but after a few miles.... nothing......


Happy Trails...
 
dannyw68;110314 said:
Turns out the leak was from that hose. It was routed straight down from the tank. i rerouted it and now there is no leak on the ground.

However, I did notice that when the bike is leaned on the kick stand, some small amount of fuel leaks from around the fuel cap. I opened it and the level is below the rim, yet somehow it is getting siphoned up and out of the cap? Its not much, just three or four drizzles, but really strange. Any ideas?

Ok... now you have the same other problem I had. The O-ring on the base plate for the cap is leaking YOU NEED TO FIX THIS BECAUSE WATER WILL GET INTO THE FUEL. Guess how I know this****************************************! I took the three allens out, removed the plate and could see the tank wasn't completely flat and could see where the O-ring wasn't sealing. I got some neoprene gasoline proof gasket material, cut to fit, applied high priced gasoline proof gasket sealant to the new gasket, left the O-ring in place, bolted it back down snug and evenly, problem solved!!! Fix this asap or you can water up the fuel and not know why..


Don't forget to check out the Adventures of Lonerider in the ride section
 
K7MDL;110302 said:
It just runs down your fender and drips onto the hot header pipes and flashes into a fire! :busted: I have not personally heard of that happening though. Just seems like it could happen.


Note vent hose on brand new show room Huskys, I doubt the factory or the dealers would do that if they thought they would catch fire.....
 

Attachments

  • DSC00377.jpg
    DSC00377.jpg
    99.6 KB · Views: 9
  • DSC00487.jpg
    DSC00487.jpg
    78.2 KB · Views: 7
  • Photo019.jpg
    Photo019.jpg
    99.6 KB · Views: 9
dannyw68;110314 said:
Turns out the leak was from that hose. It was routed straight down from the tank. i rerouted it and now there is no leak on the ground.

However, I did notice that when the bike is leaned on the kick stand, some small amount of fuel leaks from around the fuel cap. I opened it and the level is below the rim, yet somehow it is getting siphoned up and out of the cap? Its not much, just three or four drizzles, but really strange. Any ideas?


According to the manual, you're supposed to keep the level below the LOWEST part of the cap when installed, nevermind the rim...I regularly fil mine up well above that though, but only when I'm riding on the street for a few miles and I know I'm just gonna burn the gas away well before I park it.
 
Back
Top