DG Harv Serv
Husqvarna
AA Class
Intermittently the Fuel Pump does not "kick in" when you turn on Ignition . When this happens the Relay does not switch in (click ) .
I have :- Replaced Ignition Switch , Replaced Relay , Bypassed "Kill" Switch , Bypassed Clutch Switch , Cleaned and dielectric greased all connectors , removed wiring Loom and checked for cuts etc....
The Relay has power from the fuse on the Grey wire ( at all times ? ) But doesnt seem to get power on the Yellow/Green Wire from the ECU ? Could I have a Faulty ECU ? or What would tell the ECU not to switch in the Fuel Pump Relay ?????
Dealer and ibeat are about 4 hours away , so trying to work though this in case its something real simple !
I have :- Replaced Ignition Switch , Replaced Relay , Bypassed "Kill" Switch , Bypassed Clutch Switch , Cleaned and dielectric greased all connectors , removed wiring Loom and checked for cuts etc....
The Relay has power from the fuse on the Grey wire ( at all times ? ) But doesnt seem to get power on the Yellow/Green Wire from the ECU ? Could I have a Faulty ECU ? or What would tell the ECU not to switch in the Fuel Pump Relay ?????
Dealer and ibeat are about 4 hours away , so trying to work though this in case its something real simple !