• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2011 SMS 630 Won't start

jae

Husqvarna
AA Class
Having an issue with my bike not starting. Just did a valve adjustment, replaced the battery, and put an aftermarket head unit cause the old one rotted out and flooded from rain. Put the bike back together and it took 2 cranks and started up and ran fine. Ran it for a minute or so and shut it off. Let the bike sit for about 30min so I could finish putting the plastics and everything back on and after that couldn't get it to start again. Changed the plug and confirmed it had good spark. I can get it to turn over on starter fluid for a second but won't stay on. Checked the fuel pump and it is working. I did notice the priming wasn't as loud as it used to be when turning the bike on but it still pumps fluid just fine. Checked the valves again to make sure that I didn't mess up the adjustment and they are all within specs. Any ideas what's happening?
 
Back
Top