• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

71 400 MI frame Clutch Cable installation

M

mike328

Husqvarna
AA Class
I am installing the clutch cable on my 71 400 (MI) frame..

would someone please post a photo or explain the position of the locking nut on the clutch side (end with the spring)...
basically clutch cable has a threaded shaft that fits into a slot under the engine & the cable attaches to the clutch lever (under the engine)my question: is the nut before or after the "slot"?

hope I explained well,..
 
"Rev"...thank you..that is how I installled it..& of course never got around to posting a photo...LOL
thanks again!
 
I am having some problems with the routing of the cables (clutch & throttle)
they are getting pinched at the frame neck/handlebar area... any comments about routing?
 
You must log in or register to reply here.
Back
Top