• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

A temperature gauge for TE630

Rotax_655

Husqvarna
AA Class
I can not figure out if the electric fan is started to

right moment.
so I decided to mount a gauge water temperature.
work in progress

necessary material
a piece of pipe 1/2 inch steel gas
a bolt thread M10x1
sensor and instruments of a Pegaso 650 motorcycle or similar
 

Attachments

  • 20160602_170217.jpg
    20160602_170217.jpg
    93.8 KB · Views: 62
  • 20160602_160643.jpg
    20160602_160643.jpg
    95.5 KB · Views: 55
  • 20160602_161922.jpg
    20160602_161922.jpg
    85.4 KB · Views: 54
  • 20160602_162133.jpg
    20160602_162133.jpg
    90.2 KB · Views: 55
Only 100 gr.
 

Attachments

  • 20160602_164824.jpg
    20160602_164824.jpg
    111.3 KB · Views: 36
  • 20160602_165418.jpg
    20160602_165418.jpg
    97.1 KB · Views: 34
Yes that is a great complete kit with the fin sensor I mention above. My son uses the KTM one on his enduro race bike and we have set it to bring on the fan a bit earlier than the standard thermostat - great as it also gives to the temp you are running at a glance.
 
this is a temporary solution that I made .
I have not a precise measure of the cooling liquid in this way
 

Attachments

  • 20160612_105933.jpg
    20160612_105933.jpg
    100.9 KB · Views: 26
  • 20160612_094954.jpg
    20160612_094954.jpg
    100.1 KB · Views: 24
  • 20160612_094935.jpg
    20160612_094935.jpg
    98.2 KB · Views: 26
  • 20160612_094912.jpg
    20160612_094912.jpg
    99.8 KB · Views: 24
I just stick one of these on my end tank, less convenient, but I can lean up and see it.

FXTEMP.jpg


http://www.motorcycle-superstore.com/4783/i/factory-effex-temperature-sticker
 
Back
Top