• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Automatic bearings

Michel Dufayard

Michel Dufayard

Husqvarna
Pro Class
Somebody knows the dimensions and #of the bearings
near freewheels 360-390-420-430-500 ?

The bearings on crankshaft in 1st clutch drum 430/500 is 25 id x 29 ed x17 mm

Thanks
 

Attachments

  • IMG_4304.JPG
    IMG_4304.JPG
    108.3 KB · Views: 14
The 420 uses fe438z fe458z and fe478z for 2 3 4 gear
The 30x38 50x58 70x78 . All just under 12 mm wide

They are all available from GNM bearings and are the oem bearings . Lot cheaper than nos
 
You must log in or register to reply here.
Back
Top