• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Case saver

Are these still available with the husky logo's? As for Husky I did the logo myself! lol The oil filter is designed to cool the oil down and it gives a little more capacity. I could see the use if you do a lot of slow rides and get minimal air flow.
 
Aquatic said:
If you want a logo, just ask.
Click to expand...
Hey dude, you're about 2klms from my house, can you do these for the xlite(te250/310/250r/310r) ? They look shit hot and as you know, the clay and mud here means the front sprocket gets caked with OEM plastic setup.

Say yes ! :D

Happy to donate OEM unit for mock up, I am down with a broke. Shoulder so out for next 3-4 weeks.
 
rabskyline said:
Hey dude, you're about 2klms from my house, can you do these for the xlite(te250/310/250r/310r) ? They look shit hot and as you know, the clay and mud here means the front sprocket gets caked with OEM plastic setup.

Say yes ! :D

Happy to donate OEM unit for mock up, I am down with a broke. Shoulder so out for next 3-4 weeks.
Click to expand...
pm me your email and/or mobile number
 
Just have to say, I received advice from Aquatic on Thursday night that the case saver was ready. I EFT payment and received it in the post today! How good is that! To top it off, absolute perfect fit and was all done and dusted within about 3 minutes ... that's from starting to remove original plasic guard to when I tightened the final screw. Very impressed, very happy :)
Cheers
 
AJM6000 said:
Just have to say, I received advice from Aquatic on Thursday night that the case saver was ready. I EFT payment and received it in the post today! How good is that! To top it off, absolute perfect fit and was all done and dusted within about 3 minutes ... that's from starting to remove original plasic guard to when I tightened the final screw. Very impressed, very happy :)
Cheers
Click to expand...

Proof?
photos or it didn't happen!

Glad you happy Squire
 
Thanks Aq.
More than happy with my case saver. Quality and service first class.
Cheers
Biff.
 

Attachments

  • 20140702_095612.jpg
    20140702_095612.jpg
    212.7 KB · Views: 69
Hi.
Yes it is a Seat Concept LOW version.
It's 15mm lower for those with ducks disease.

I tried a Kouba Link but kept bottoming the spring even with the spring compression tightened a few turns.
It must get more leverage with the longer link. Put the original back on and no problems.

Cheers
 
You must log in or register to reply here.
Back
Top