• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

clutch plate question

I will post the results as soon as I compare them.

I'll race ya....

EBC friction plates, part # CK1247
Width of tab = .540 - .542 in.
Distance between tabs = .915 in. (approx)
Thickness of plate = .114 in.
Diameter of plate = 5.4 in.

The plates fit into the hub but so far, the measurements are disappointing, the .114 thickness is the wear limit for the 450-510, new Husky plates are supposed to be .118 thick.
 
I ordered a set of Moose (# F70-5105-8) with the below fitment 08 and 09 CRF 450R & X and I can tell you that they do not match up to a stock 2007 450 TE friction, not even close.
Does anyone have a substitute friction that they know works in the 2007 450 TE

2007 Honda CR250R
2006 Honda CR250R
2005 Honda CR250R
2004 Honda CR250R
2003 Honda CR250R
2002 Honda CR250R
2001 Honda CR250R
2000 Honda CR250R
1999 Honda CR250R
1998 Honda CR250R
1997 Honda CR250R
1996 Honda CR250R
1995 Honda CR250R
1994 Honda CR250R
1993 Honda CR250R
1992 Honda CR250R
1991 Honda CR250R
1990 Honda CR250R
2001 Honda CR500R
2000 Honda CR500R
1999 Honda CR500R
1998 Honda CR500R
1997 Honda CR500R
1996 Honda CR500R
1995 Honda CR500R
1994 Honda CR500R
1993 Honda CR500R
1992 Honda CR500R
1991 Honda CR500R
1990 Honda CR500R
2010 Honda CRF450R
2009 Honda CRF450R
2008 Honda CRF450R
2007 Honda CRF450R
2006 Honda CRF450R
2005 Honda CRF450R
2004 Honda CRF450R
2003 Honda CRF450R
2002 Honda CRF450R
2014 Honda CRF450X
2013 Honda CRF450X
2012 Honda CRF450X
2009 Honda CRF450X
2008 Honda CRF450X
2007 Honda CRF450X
2006 Honda CRF450X
2005 Honda CRF450X
 
I am in process of deciding to go back to original clutch to waken my 07 Husky or keep the Rekluse Z-start and replace just frictions...did you ever find a compatible more affordable alt ot OEM?
 
Back
Top