• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

"Error code" on neutral lamp.

Redback

Redback

Husqvarna
B Class
Hi there.

I`m the proud owner of a 2011 SM 630 with 7200km on the clock. A few weeks ago the netral lamp started to blink, 3 fast and one long, 3 fast and one long.. and so on. Checked the manual, and it says the temp senson for coolant is reading wrong values, called the importer in Norway, which confirmed the issue. On top of that, the bike was really difficult to start at cold, but ran well when warm.

Now I have installed a new tempsensor, but the blink`s still there - really annoying, because it`s now not possible to see if the new is mailfunction or operating as it should. ( Bike started on first attempt this morning in +3deg centigrade )

Any hint on to how to get rid of the error code? buy software ( from where ?) and plug it to a PC, disconnect the battery or ...???
 
Mine started blinking as soon as the p/u kit was installed. Got a load of help from the forum ... but nothing seemed to work. My local Husky shop told me to just get used to it blinking, but I wish I could do something to make it stop.

PS

Don´t have any other probs. It starts in cold and hot weather without using the start lever.
 
Hi there, I hav e checked furter on this issue - and from what I have been told, they need to connect the bike to a PC and delete the fault code, re-set it so to speak. Just changing the sensor will not remove the blinking... The bike is to be stored sfor winter shortly, during the winter storage I have ordered a full service, including re-setting the fault issue.
 
You must log in or register to reply here.
Back
Top