• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Help!! Husky is driving me crazy

It ran fine for some time. It has sat for some time and probably with the pet cock open. How many jets are there? I'm going to by a new pilot jet today. Should I consider buying any other jets?

wait... don't buy any jets unless they've been scored or gouged or mutilated. Jets really don't wear out (sometimes a needle jet will, okay).

Just METHODICALLY take them out (2-3 jets, maybe an emulsion tube), soak 'em, blow 'em clean (use an empty Bic pen if you don't have a compressor), re-inspect 'em; and soak all the passages and orifices. You do have a manual now right, right? Go slow, take pictures. Use baby steps.

...and wear eye protection when spraying anything in a carb. important safety tip.
 
Back
Top