• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc husky sm125 bogging and blowing splooge

jmb joinery

jmb joinery

Husqvarna
hello just wondering if anyone can help me ive recently brought a 2011 sm125 and is seems to be running pritty rich its blowing alot of spooge out of the exhaust and boging down in 1st/ 2nd gear at the start of a journey but once warmed up seems fine, ive tried adjusting the pilot air screw its curently at 1 and a half turn outwards realy want to avoid putting it into a garage if possible so any help would be apreciated! :oldman: also noticed it doesnt seem to have the stock exhaust its a husky pipe but i think its the full system they do could this be something to do with it? thers a slight bit of clutch slip in 1st aswell but think this is down to the midway adjuster being snapped on the threaded bar
 
If the bike is bogging while its cold, I'd say that's pretty normal. Until you "clear it out" and get it warmed up.

Have you done a compression test?

I would do the basic maintenance things including re-packing the silencer. Sealing the pipe junction.

I used to let my bike idle for 5mins to warm up. This created more spooge. If I start it and lightly rev it for 30 seconds, then ride it gently warming it up. I get almost no spooge.
 
i just did a spark plug change waiting on a new air filter although the one in ther at the min is pretty clean, its been running alot better after plug change but have notice the pipe joint seems to be leaking slightly. also got a grinding noise on the biting point pulling off in 1st but only hapens ocasionaly? went to adjust the midway to find that the threaded part of it has snaped in half so going to get a new clutch cable and see if its any better
 
I get that same grinding noise on my 05 wre [same engine], happens if i hold the clutch in between biting point and engaged too long, it's like a slight scraping sound, don't worry about it unless the clutch starts slipping, it may just be a bearing in there that's worn
 
You must log in or register to reply here.
Back
Top