• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

I need a front axle spacer

MXRider

MXRider

Husqvarna
A Class
anyone have an axle spacer? I need one for my Talon hub. (the one they sent me is way too short.
according to my caliper the out side diameter is 30mm, and Im pretty sure the axle is 25mm.

anyone have one? or at least point me in the right direction.

spacer001.jpg
 
Seems to me Talon is the one you should be contacting. If all else fails, a local machine shop could fab one up for you. You're probably not going to find one off the shelf.
 
with the right dems. width, OD, ID, i could make you one..i charge 45.00 an hour for shop time...
with a one hour, min..
 
Darkside;100159 said:
Seems to me Talon is the one you should be contacting. If all else fails, a local machine shop could fab one up for you. You're probably not going to find one off the shelf.
Click to expand...

Ya $20 should get you one made up from your local machinist.
 
I had one made locally.
I was hoping someone here might know of a Talon dealer in the states that had something.
 
so, did it cost ya 20.00???i dont know a real machinist that would even trun on a lathe for less then a 75.00 hour min...
board average is 95.00 and hour.
 
well one of my drinking buddies has access to a lathe, so it cost me a couple round of beers. lol
 
You must log in or register to reply here.
Back
Top