• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Jetting specs for 08 TXC 250 with 300 big bore kit

W

Wildman

Husqvarna
B Class
Hi, Just wondering if anyone knows, if after fitting an Athena 300 kit to TXC 250 (carb) if the jetting needs to be altered at all.
Cheers
 
I did not touch mine other than a fuel screw adjustment. Mine is set up per the JD jetting kit instructions.

Later,
 
Thanks for that. It seems to be running ok, just thought at first ride (after kit was installed) it was pinking a little under heavy load, but I havent noticed it since then. Love the low end now though;-)

Cheers
 
Where did yours end up at? 2 turns out?

jmetteer;68925 said:
I did not touch mine other than a fuel screw adjustment. Mine is set up per the JD jetting kit instructions.

Later,
Click to expand...
 
fitness2go;100719 said:
Where did yours end up at? 2 turns out?
Click to expand...

I am not sure off the top of my head.

I did lean out the needle one slot when we went to Moab and I left it when we got back. It runs a bit crisper, I get some lean pops with the SA out and it is really close to perfect with it in.

Later,
 
You must log in or register to reply here.
Back
Top