• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

need help mesh filter

P

paulang007

Husqvarna
hi new here love the forem i need help with getting the double mesh filter back on my just purchased 1998 te 610e took it out to cleen after draining oil but will not go back in sticks out to much to put cover back on with the 2 bolts thanks
paul:confused:
 
Play with it a bit and it will go back in. The inner one will only go in one way, I think it's the smaller end that's on the inside and once you get it in, the outer one will slide right in over it.
 
1lunger said:
Play with it a bit and it will go back in. The inner one will only go in one way, I think it's the smaller end that's on the inside and once you get it in, the outer one will slide right in over it.
Click to expand...
thanks will try again tommorow one way it fits over end cap 1st o ring thats the short end the other end wont push it in as far as i can but is sollid still stikin out to far cant tap it in it seems solid for some reason lol hammer time
 
Put the screens in 1st a jiggle them until they are seated all the way in and then put the cover on.
 
1lunger said:
They seat on a lip on the inside of bike. You need to get it over the lip on the inside
Click to expand...
will have a look to moz cant see lip cos of some oil inside chamber need to clean it out better so can se lip also check to see if mesh out of shape a bit
thanks for the prompt reply let you know how it turns out
 
I usually slip them over the o-rings on the cap first and put it all in together, never had a problem.

But yeah, no hammer....
 
You must log in or register to reply here.
Back
Top