• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Need help with mounting bolt on Leo X3 exhaust TE610.

MotoSteve

MotoSteve

Husqvarna
B Class
The forward mounting bolt has gone missing on my LeoVince X3 slip on exhaust. Below is not my picture but it shows the bolt i'm talking about: http://www.rickramsey.net/TE610lg/TELV1.jpg

It is the forward most bolt/big tapered washer holding the carbon strap with 2 parallel carbon lines around the can. It must have come loose and fallen off.:banghead: Guess I need more lock-tight next time. I still have the carbon strap and rubber washer.

I need a replacement bolt assembly. Can anyone tell me where to get one?:excuseme:

I bought the bike with the pipe installed so I don't know if this bolt/washer came with the pipe or is stock Husqvarna.:confused:

2006 TE610.
 
That bolt does come with the pipe. I have a X3 on my TXC and it has the same bolt. The taper part is really just a fancy washer with a 4mm threaded allen bolt. The idea behind it is really to give surface area for the carbon to prevent it from cracking. The taper I think is to keep the side panel off of it.
 
Thanks, now I know it's a LeoVince bolt/washer.

Thanks for all the replies. I'll give LV a call tomorrow and see how much that fancy washer costs.:D

husky666;85682 said:
You could call Leo Vince,they have warehouse in CA. 510-232-4040
Click to expand...
 
Or just use a stainless steel fender washer and a M6 socket head bolt. I had to trim a bit off the washer but quick work with a hacksaw.
 
Doesn't exactly look sano but it will work. Thanks.

e994d20f.jpg

81e6f683.jpg
 
You must log in or register to reply here.
Back
Top