• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Rear suspension maintenance on a 2006 TE250

Coffee

Coffee

CH Owner
Staff member
GO HERE TO DISCUSS THIS THREAD:
http://www.cafehusky.com/threads/rear-suspension-maintenance-on-a-2006-te250.2161/#post-33503

Remove brake from swing arm, note one is a sheet metal screw and another is a bolt

DSC_0386Medium.jpg


Support brake

DSC_0387Medium.jpg


Remove brake pedal

DSC_0400Medium.jpg


Remove cover, kickstand, and roller from left side

DSC_0401Medium.jpg


Pic says it all

DSC_0391Medium.jpg


Glad I did the suspension that bolt was a bit dry

DSC_0395Medium.jpg


DSC_0408Medium.jpg


All clean, bolt on left needs washer (not shown).

DSC_0414Medium.jpg


There is a bushing with shoulder in swing arm, then washer, then nut all under the plastic covers

DSC_0412Medium.jpg



These grease fittings are nice but not complete - I would not rely on the grease fittings greasing everything.
Also the file "2006-DOHC-Husky-parts.pdf" is different than what this TE250 had. Here is a nice feature:

DSC_0405Medium.jpg
 
You must log in or register to reply here.
Back
Top