• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Should I, or Shouldn't I?...USA Recall

psmura

psmura

Husqvarna
AA Class
Hey all,

I am a little bit confused by this US recall. I have owned my 2014 for about 2 years now and it runs pretty darn well. The P.O did the temperature "fool" mod (has a toggle switch for hot/cold riding) and the pod mod from day one. (Also running a single GPR exhaust)

Overall I think the bike is really running great. I really haven't gotten many flame outs even with the new exhaust. A quick punch of the throttle before taking off from a stop eliminates any chance for a stall.

Now I still have not gotten a letter from Husqvarna stating that my bike falls under the recall. I drive by a rather local KTM dealer and have been meaning to stop regarding the recall.

Would you guys even bother with the recall if my bike is running smoothly? How do I go about reverting back to stock?

Any insight is greatly appreciated.
 
It would be good to know which firmware you have in there. There was an update that should have have been uploaded before delivery.
 
Can you tell me exactly where to look for this on my bike?

Guess I just assumed that all the bikes had the issue. I didn't know that an update was uploaded on some bikes.

Overall I am not concerned how the bike runs. I just don't want to miss the recall and be stuck with a new boat anchor.
 
Regardless of Firmware the recall applies to all TR650s, there were no bikes sold/delivered without the inherent stalling defect, although some do have updated 3rd generation firmware 8543016. The bikes that do have the latest software do tend to run a lot better than the older versions, but some are still not as good as they should be.

Unless you have the relevant diagnostic software and connectors you cannot find the information as it is embedded in the ecu.

My bike does not have the updated firmware, it is still the 2nd generation and it runs very well, but the reason for that is several mods including a bigger injector etc. I am waiting on the update/recall because i am currently using the bike regularly. When I get a chance i will get it done.

My advice is, if you have the time to take your bike to the dealer and be without it for the 4 to 6 weeks it takes then get it done.
 
the recall usually doesn't take more than 2 weeks in the US. Mine was sorted within one week and was well worth it. Mine had the latest pre-recall firmware and ran reasonably well but the recall improved more than just fixing the stalling. Even if you're happy with how it runs it's probably worth the hassle just for re-sale value and legal situation "just in case". I would bring it back to stock condition prior to the recall and make sure the adaption reset and rebuild is done properly to start with a clean sheet.
 
For anyone who has done this in the USA, can I just take the bike to a KTM dealer, without the recall letter? Are all TR650s included? Ours stall when rolling the throttle closed during stops.
 
You don't need the letter, they just check the vin number.
I was unable to get a KTM only dealer to do the re-call.
Has to be a Husqvarna dealer.
 
UPDATE:
We decided to have the service completed at Orange County KTM. As described above, the service took about 1.5 weeks to complete. The Strada runs well, but I do notice a slight uneven running (as if the engine is "hunting" for a proper mixture) while cruising in 4th gear at about 4k rpm. BUT the engine stalling seems to be cured. For sure, when the bike is started, the rpm's range way up to 2k rpm, then it settles down slowly. This happens hot or cold.

I also had them service the radiator with "Engine Ice" and the bike ran 1-2 bars lower on the temp. graph in 90 degree heat and 70mph cruising speeds for 1 hour.

YMMV.
 
psmura said:
Would you guys even bother with the recall if my bike is running smoothly? How do I go about reverting back to stock?
Click to expand...

Yes I would bother with the recall. My bike was the same as yours. It stalled stock, but it ran fine with the booster plug fitted. I disconnected the booster plug before taking it in for the recall. After the recall the stalling at low revs issue is resolved, but also the bike feels like it's pulling stronger from lower revs. To remove the booster plug you need to remove the left side panel, then disconnect the plug on the bottom of the airbox which is connected to the AIT sensor in the airbox. You will find the original AIT plug lead connected to the other side of the booster plug, so just disconnect that and connect that plug to the AIT sensor. You have to squeeze in the metal ring on the plug to allow it to be removed.
 
You must log in or register to reply here.
Back
Top