• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Steel Mesh/Screen Filter Orientation

S

SimpleOne

Husqvarna
AA Class
Hi Guys,

Stupidly, I didn't pay attention when removing the screen filters during an oil change. Can anyone describe which end of the screen filters should go into the engine first? (i.e. towards the centre line of the engine).

This is for both the LHS and RHS screen filters.

EDIT:
Here's the answer for anyone looking in future:

TE630 Filter Screen Orientation.png

Thanks!
 
Okay, I found this image in the workshop manual, but, impending feeling of doom when I say...what gaskets? (number 11 in the diagram).

I saw nothing resembling a gasket in either of those locations, does anyone else have a gasket there?
 

Attachments

  • TE630 Filter Screen.png
    TE630 Filter Screen.png
    194.9 KB · Views: 16
SimpleOne said:
Okay, I found this image in the workshop manual, but, impending feeling of doom when I say...what gaskets? (number 11 in the diagram).

I saw nothing resembling a gasket in either of those locations, does anyone else have a gasket there?
Click to expand...


On the sprocket side of the engine I do not remember there being any gaskets as such, rather the hole cover has an o-ring on its inside face which provide the seal when the two side bolts are tightend up.
 
Okay thanks mate, that's a relief as I do indeed have, two o-rings on the plate/cover for the screen filter on the LHS (sprocket side).
 
SimpleOne said:
Okay thanks mate, that's a relief as I do indeed have, two o-rings on the plate/cover for the screen filter on the LHS (sprocket side).
Click to expand...

Two on the inside of the cover is indeed correct. No need to use new- I’ve been using the originals for 23,000 miles now. Also- plenty of info on these screens in this forum. Short version: best to check that right hand screen from time to time as it does happen that they come apart.
 
You must log in or register to reply here.
Back
Top