• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TE610 2000 Wiring

knucklehead

knucklehead

Husqvarna
Hey just to make sure is this correct way to do wiring, someone else has built this bike and the wiring is pretty stripped. And I can just find bad quality picture diagrams so little help would be nice! It gives spark, but I'm not sure about the lights.

Engine is year 2000, left kicker, no e-start, no battery.
Stator gives: Red, Green, Black and two yellow wires.

Two yellow wires go in to one, then to regulator and then rear and front lights - 12V?
red and green goes straight to cdi - spark timing / pick up / advance?
black goes to key and then to coil - Ground?

Coil has orange wire as well, but doesn't go anywhere? is it for Tachometer?

thank you :)
 
I can only say mine is AC. I tried to make it DC for my Audi style LED running indicators, but he blown them all 4 up in 2 corners right and one left. So is am back to the original bulb indicators. I could not find any information on his electrics. Even Ben van Erp, THE Husqvarna authority in the Netherlands said this information is very hard to get, if to get at all.

I have a 2000 TE-610 too. (2001 on the papers)

The SM-610 E and TE-610 E is DC from factory because it has electric start and a battery. The 610 kicker is way more powerful and crude and i am afraid the wiring can not be exchanged with the TE-610 E version from the same year. Mine is a former competition super moto, the SM-610 E version is 50-50 road - circuit super moto which is a way different bike with and other engine and way different gearing. The same story, but then in enduro goes for the TE-610 E version. Only his plastics look the same, but that's all.

Black is mass, and Yellow is live. At least at mine, which originate from Italy and is later imported in the Netherlands. So it is not a bike aimed to the Dutch market when new.

I don't have and orange wire coming from the coil.
 
Hmm yes very interesting. My bike is from 1993 and new engine year 2000. Also Im wondering why there is two yellow wires coming from stator. Well I continue searching, thank you for answering.
I also found one diagram
 

Attachments

  • IMG_20210406_224025.jpg
    IMG_20210406_224025.jpg
    97.4 KB · Views: 14
  • KTM_coil.jpg
    KTM_coil.jpg
    34.1 KB · Views: 13
You must log in or register to reply here.
Back
Top