top out washers?

[megagobby]

can any 1 help me with the fitting location with fork top out washers on 40mm wr 250 83 forks any pics will help thanks

 

[Fritzcoinc]

The top out washers are split and go just under the big end of the aluminum tube called a damper or oil metering tube. Then insert the big end of the aluminum tube in the fork tube, The top out washer will be tight in the tube, slide in the steel pc with the big radius on the ID, called bottom valve, over the aluminum pc and into the tube and then retain it with the snap ring.

In the 83 parts manual below:
The metering tube is item #4
The top out washer is item #5
The radius ID pc, bottom valve, is item #11
Snap ring item #12

Heres a parts list for an 83 that shows the forks:https://www.halls-cycles.com/Catalog/PDF/Husqvarna .PDFs/1980-1989/83_all_models.pdf

Heres a parts manual for an 86 model, similar, that shows the parts a little better: https://www.halls-cycles.com/Catalog/PDF/Husqvarna .PDFs/1980-1989/86_all-2st_models-2.pdf

 

[Northern Husky]

ln the first pic the screw is pointing to where your top out washer goes, with the fork dissasembled.

second pic shows semi re assemble.

let me know if you need anymore pics as the forks will be apart for a bit untill my top out washers arrive.

 

[megagobby]

thanks northern husky

i assembled forks in the same way. i just wanted to be sure it was correct thanks