• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

wheel bearings and seals

Joliet

Joliet

Husqvarna
AA Class
I did a search but could not find what I was looking for. Does anyone have bearing and seal sizes or cross reference numbers. I am heading out of town and want to pick up some spares before I go. I want to pick up the stuff for the rears, but will get the fronts too if I get the info. Bike is 2008 TE510, Thanks, Ken
 
Joliet;38278 said:
I did a search but could not find what I was looking for. Does anyone have bearing and seal sizes or cross reference numbers. I am heading out of town and want to pick up some spares before I go. I want to pick up the stuff for the rears, but will get the fronts too if I get the info. Bike is 2008 TE510, Thanks, Ken
Click to expand...

Hi Ken,

front bearing numbers are 6905-2RS, Rear wheel is 2 No 6005-2RS & the sprocket side is 63005-2RS

These bearing sizes are the same for almost all the Husky models from 2002 on
 
If I go down to the local bearing supply store will they be able to cross reference these numbers, or are these Husqvarna numbers?

What I am looking for is a part number for the wheel bearings and seals (or the sizes) so that I can order them from the bearing supply store. I could take them out and measure them, but then my bike would be in pieces until I get the new parts in.

I am sure someone has numbers or sizes that will work. Thanks, Ken
 
SEALS

Front

1 off. 28mm ID X 50mm OD X 5mm deep (probably not available at bearing shop but 7mm deep will work fine)

1 off. 32mm ID X 50mm OD X 7mm deep

Rear

2 off. 30mm ID X 47mm OD X 7mm deep

These sizes fit my '05 TE250..Should fit yours OK

However, it would be wise to double check these against the Husqvarna Spares manual...(Should be available online..??)
 
You must log in or register to reply here.
Back
Top