• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Wr300 2012 Piston Dimensions

Mike-Swe

Husqvarna
Hello, im looking for dimensions on a wr300 piston, do anyone have a piston laying around?
The dimensions i need are height and bolt to topp of piston, preferebly in Millimeters!

//Mike
 
Hi Mike, compression height is 38.00 mm (measured by me and found on the Woessner catalog) and total height I measure 75.50 mm on the exhaust skirt and 73.30 on the intake skirts, those measurements are not 100% accurate as the piston crown does have a tiny bit of carbon buildup and I am using vernier calipers.

Cheers.
 
Back
Top