• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

The iBeat Thread

Caboose said:
You have to adjust the No.1 FB setting until you read 100% at the "Feedback adjustement Value" (next to "Activity"). The engine have to be warm and running at idle. This will solve your problem.
pjxjcpc.jpg
Click to expand...

Thank you Caboose, i will try it next thing tomorrow morning. At this point i'm a bit desperate, i don't have a delership around me that can help me with this issue so you guys are my only hope. Up to this point i made the ghetto usb vagcom thingie with the windows xp 32bit running on a vm with ibeat 2.0 and trying all this stuff out has rendered me exhausted (i also had to push the bike for 1 km today on 35 degrees C / 98 F so...yeah) I did update the values earlier to 105 110 115 and immediatly the bike would start 4/5 times but every time the engine got warm and i tried to start it more than once i drowned the spark plug and had to wait for 30 mins. will update tomorrow.
 
So i fiddled with No1 until i got activity arround 100%. So in the end i had 86-105-115 but i noticed i did not have power in low revs. So i upped NO1 to 94 and now power is ok. But still when i try starting it it will start 3/5 and if i have to many failures then it will not start at all, probably because i'm getting the spark plug wet. I noticed something curious thoough, when i enter the fb menu the engine starts reving abnormaly, also when i quit...it takes a bit to stabilize; also, sometimes the bike idles at 2200 with no reason...maybe it's got something to do with the fact that i reset the long term fb and need more hours of on time till it stabilizes...otherwise, with 94-105-115 power delivery is fairly liniear, with a bit more power in mid range, but it does go out of breath when i reach 7500 rpm.

I did burn a fuse with my ghetto vagcom cable (so be aware this might happen if you use exposed wires like me) but i found something curious, can you guys tell me what this is?
 

Attachments

  • IMG_1156.JPG
    IMG_1156.JPG
    117.2 KB · Views: 36
So guys, i have bought the power up plug and screw to do the upgrade, i'm now waiting for the delivery. Should i start the fb correction with 100-100-100 after de PU upgrade?
I also have problems with the coolant liquid, and most probably i have a blown cylinder gasket. Therefore i ordered the 1.1mm gasket, the cylinder head gasket and the bottom gasket. I will also check the valve clearance if i open up the engine.
The problem with the coolant is that it is pushed out through the expansion tank as you can see in the video link below.
View: https://youtu.be/EHGwGC_YA-A
 
Soaime said:
I did burn a fuse with my ghetto vagcom cable (so be aware this might happen if you use exposed wires like me) but i found something curious, can you guys tell me what this is?
Click to expand...

Thats the plug of the tilt sensor maybe?

I would solve the problem with the gasket and then you should see the idling/starting problem.
And/or try to fiddle with the idle screw on the throttle body (give it some more air maybe) AND the fb No.1 setting until it idles and starts fine.
 
Soaime said:
I did burn a fuse with my ghetto vagcom cable (so be aware this might happen if you use exposed wires like me) but i found something curious, can you guys tell me what this is?
Click to expand...

Yes, that is the bypass plug for the tilt sensor the SMS bikes have.

.
 
Soaime said:
So guys, i have bought the power up plug and screw to do the upgrade, i'm now waiting for the delivery. Should i start the fb correction with 100-100-100 after de PU upgrade?
I also have problems with the coolant liquid, and most probably i have a blown cylinder gasket. Therefore i ordered the 1.1mm gasket, the cylinder head gasket and the bottom gasket. I will also check the valve clearance if i open up the engine.
The problem with the coolant is that it is pushed out through the expansion tank as you can see in the video link below.
View: https://youtu.be/EHGwGC_YA-A
Click to expand...

How hurry !!
Are you sure the head seal is broken?
Let's talk in a message not on ibeat tread
 
So guys i installed my pu plug. The exhaust sounded smoother from the first start. I tried running it 95-105-110 and now am at 100-105-110.
Problem is, the bike is still hard to start even with no1. set to 90. It is also blowing out cooling liquid so from the troubleshooting manual it seems like i have a blown gasket and it also affects the engine start. Will do a leak down test to confirm.
Otherwise, with no1 set to 100 it wheelies using only throtle so i like that :)
Bike is stock air filter and double can exhaust with catalizers in.

What setting works best for your stock 630 with pu plug?
 
Now that I'm in vacation I found some time to try to connect with Ibeat.
Unfortunately I can not
To connect it to the bike.
Always says "incorrect port"
Where am I wrong?
Every advice and criticism is well accepted
 
Rotax_655 said:
Now that I'm in vacation I found some time to try to connect with Ibeat.
Unfortunately I can not
To connect it to the bike.
Always says "incorrect port"
Where am I wrong?
Every advice and criticism is well accepted
Click to expand...

Rotax, if it says incorrect port then probably you did not select the correct com port or you didn't set up the virtual machine all the way. Do you have a virtual machine or a standalone laptop with windows xp 32 bits?
You can always go to system properties / device manager / and see there on what com port your USB Vagcom is connected on. Then select the exact com port in iBeat and it should work if you have your virtual machine set up correctly.
 
When I first came up with using the VAGCOM usb to OBD2, I recommended the #4 pin on the OBD2 side of the adapter. After many subsequent uses, I found that the #5 pin was more universally accepted to avoid the communication stops warning.
 
Hola 630 guys, I live 8000 feet (2400 meters) up in the Andes of Ecuador, my bike is bone stock and runs terrible. The O2 sensor is still in, and I really need some advice on where to set the fueling. I would delete the sensor and insert a resistor if I could figure out which two wires to use. The cost and time to get a PU kit shipped down here is prohibitive. Thanks in advance for any help.
 
eddychecker said:
When I first came up with using the VAGCOM usb to OBD2, I recommended the #4 pin on the OBD2 side of the adapter. After many subsequent uses, I found that the #5 pin was more universally accepted to avoid the communication stops warning.
Click to expand...
These are my electrical connections
Positive - brown
Negative - blue
Signal - yellow green
I miss something?
The entry door is 7 but ibeat says it is not possible to connect ....20170723_105148.jpg 20170723_103941.jpg
 
You must log in or register to reply here.
Back
Top